基于GIS的石家庄市雾霾分析     

苏亚聪  史娟  徐爽 《北京测绘》2020,(2):233-237

为了得出雾霾气象成因机制、影响因素和时空分布特征,以石家庄市区与郊县为研究区域,将2013年9月至2016年12月石家庄市各市区、郊县的PM2.5历史监测数据中的有效数据进行了数据分析处理得到雾霾浓度数据,还有温度、降水、风速、地形和人口密度等数据,运用GIS分析的方法,模拟绘制石家庄雾霾的时空分布图、雾霾与各影响因子的专题对比图,得到雾霾形成机制的因子、雾霾的时空分布规律、雾霾季节变化特征、雾霾与地形间的关系等;运用数据分析软件OriginPro8.SR3分析雾霾浓度与风速数据、降雨数据、温度数据间的相关性。  相似文献   

基于概率积分法的采动坡体稳定性预测与分析          下载免费PDF全文

王猛  孙丽丽  薄怀志 《山东国土资源》2018,34(12)

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。  相似文献   

2000—2015 年伊犁河谷植被覆盖时空变化特征   总被引：1，自引：0，他引：1       下载免费PDF全文

孙国军  李卫红  朱成刚  崔东  刘海军 《干旱区地理》2020,43(6):1551-1558

利用 2000—2015 年的 EOS／MODIS 数据，采用趋势分析、Hurst 指数、变异系数法对伊犁河 谷植被时空变化及未来趋势进行分析，结果显示：空间分布上，伊犁河谷植被覆盖度呈北部、南部、 东部偏高，西部、中部偏低的分布特征；时间变化上，2000—2015 年，伊犁河谷植被覆盖度波动减 小，减速为 6.25%·(10 a)^-1；区域分布上，伊犁河谷植被表现为低波动变化，波动程度中等以及下占 73.16%，波动程度高的区域占 26.84%。未来预测表明，伊犁河谷植被覆盖呈退化趋势，其中，持续 退化的面积占 57.55%，持续改善的面积占 13.51%。  相似文献   

路网约束条件下热力规则设计与试验     

杜晓  周玉秀  周琦  郑义  张俊辉  林尚纬  陈利军 《测绘通报》2020,(7):18-21

热力图是一种能直观准确展示空间观测值的有效工具，在多个领域具有广泛应用。本文在分析设定不同道路层权重、道路技术等级分类的基础上，以反距离权重、直方图均衡化、密度补偿、参数多次迭代等方法，研究构建了以热力方式展示道路网分布及发达程度的相关规则体系。热力规则通过道路赋权、路线曲面化、密度协调、图面综合等多套规则的有机结合，实现了道路网总体发达水平信息的提取与展示，并以全球地理信息资源建设项目路网成果中的亚洲和非洲部分国家数据为例，进行了信息提取与热力分布试验。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

顾及地形起伏的无人机影像覆盖分析方法     

张衡  李骁  叶朋飞 《测绘通报》2020,(1):102-106

使用无人机实施测绘航空摄影时，由于无人机相对航高较低，地面起伏会对无人机影像的分辨率、覆盖范围、重叠度造成较大的影响，影像成果会出现分辨率不足、重叠度不够、覆盖漏洞等缺陷。针对这一情况，本文提出了一种利用数字微分正解法的计算方法，借助DEM准确计算每张影像的覆盖范围，并使用FME软件高效生成全部影像的覆盖范围。经过实际使用，验证了该方法可以在航线设计阶段准确预测并分析全部影像的覆盖范围、重叠度，因此可及时发现设计问题并调整航线。该方法可以有效减少因地形起伏造成的影像覆盖缺陷，减少返工现象，从整体上提高了作业效率。  相似文献   

资源三号和天绘一号卫星影像无控联合平差精度分析     

郑义  张宏伟  杜晓  张俊辉  周琦  林尚纬  陈利军 《测绘通报》2020,(7):10

近年来国产卫星传感器类型日益丰富，使用自主可控的国产卫星影像进行生产和研究的需求越来越大，多源国产卫星影像联合平差的精度分析显得尤为重要。本文针对在立体测图生产中，资源三号卫星影像在时相较旧、噪声较大、云覆盖和摄影漏洞等特殊困难的条件下，利用天绘一号卫星影像进行补漏生产的情况，最终分析并验证了两者无控联合平差的可行性和成果精度。  相似文献   

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska     

Olufemi P. Abimbola  Aaron R. Mittelstet  Troy E. Gilmore 《水文研究》2020,34(16):3481-3491

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.  相似文献   

Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献